Sony VGF-WA1 Timer settings, Using the Sleep Timer, Using, On-Timer

2 Press /to select [On-Timer], and then press ENTER.

3 Press /to select [Timer1] or [Timer2], and then press ENTER.

4 Press /to select [On], and then press ENTER.

The On-Timer time setting wizard screen appears.

5 Press /, ENTER, or BACK to set [Start Time] and [Finish Time].

6 Press /and ENTER to set the day of the week.

While playing the content that you want the On-Timer to play, press

SETTINGS.

1

 While setting the Sleep Timer on the main unit of this device, you cannot set the Sleep Timer by pressing the SLEEP button on the remote control.

Using On-Timer

You can set the On-Timer to start playing the desired content at a specified time (On-Timer function).

You can set up to two On-Timers.

In any function, press SETTINGS.

Notes

 If you perform the following operations before the Sleep Timer expires, the Sleep Timer resets.

– Turn the power off.

– Go into standby mode manually.

– Connect to a computer via a USB cable.

– Set the interval for the Sleep Timer again.

– Set the Sleep Timer to [Off].

– Perform [Options] - [Factory Default] in settings.

– Perform [Network Settings] - [Access Point] or [Wireless Adapter] in settings. (This device restarts.)

Timer settings

Using the Sleep Timer

You can set the Sleep Timer to automatically go to standby mode after a specified time elapses (Sleep Timer function).

1

2 Press /to select [Sleep Timer], and then press ENTER.

3 Press /to select the interval from [30 minutes], [45 minutes], [60 minutes], or [90 minutes], and then press ENTER.

The Sleep Timer is set and appears on the playback screen. After the selected time elapses, the volume turns down gradually and this device goes into standby mode automatically.

Tips

You can also press the SLEEP button on the remote control to set the Sleep Timer. Each time you press the SLEEP button, the interval changes as follows:

[Off] → [30 minutes] → [45 minutes] → [60 minutes] → [90 minutes] → [Off] …

If the Sleep Timer is set, you can press the SLEEP button on the remote control to see the remaining time before going on to standby mode. If you press the button once more, the Sleep Timer is set again.

42