Press SETTINGS.
Press SETTINGS.

Enhancing the stereo feeling (VPT Wide Stereo)

By using VPT (Virtual Phone Technology), the virtual distance between the right and left speakers is increased, and the stereo feeling is enhanced.

1

2 Press /to select [Sound], and then press ENTER.

3 Press /to select [Effects], and then press ENTER.

4 Press /to select [VPT Wide Stereo], and then press ENTER.

VPT Wide Stereo is activated and appears on the playback screen.

Note

You cannot activate VPT Wide Stereo when:

–[Options] – [Audio Out] is set to [Line/Optical].

–Headphones are plugged into this device.

Adjusting the acoustic response of the speakers (Digital Linear Phase)

Adjusts the phase response and frequency response of the speaker’s mid-high range to achieve a highly precise localization of sounds and a feeling of greater depth.

1

2 Press /to select [Sound], and then press ENTER.

3 Press /to select [Effects], and then press ENTER.

4 Press /to select [D-Linear Phase], and then press ENTER.

5 Press /to select the desired type, and then press ENTER.

Digital Linear Phase is activated and appears on the playback screen.

Digital Linear Phase setting options

Option

Description

 

 

Type A

Attains a flat frequency response

(default)

such as with monitor speakers,

 

suitable for a wide variety of

 

genres, from pops to classics.

Type B

Stresses the middle range audio,

 

ideal for vocals.

Type C

Attains an intermediate response

 

between [Type A] and [Type B].

Note

You cannot activate Digital Linear Phase when:

–[Options] – [Audio Out] is set to [Line/Optical].

–Headphones are plugged into this device.

Operation

41