Listening to an audio device (Auxiliary Function)

You can connect an audio device, such as a Walkman, to this product to listen to music from the audio device via the speakers of this device.

1 Connect an audio device to the AUX jack of this device.

2 Press the AUX button.

The AUX lamp lights up and this device switches to the Auxiliary Function.

3 Play music on the audio device.

The music on the audio device is played via the speakers of this device.

Press VOLUME +/- to adjust the volume.

Tip

If the output level of the audio device is too high and the audio is distorted, you can adjust the sensitivity of the AUX jack by setting the [Options]

– [AUX Sensitivity] option.

Notes

You cannot operate the audio device through this device.

Use a non-resistor type cable to connect the audio device to this device.

Listening to music files stored on the internal memory (Internal Memory Function)

While playing a music file that is stored on a computer using the PC Streaming Function, you can download the music file to the internal memory (128 MB) of this device. Then, you can play the downloaded music file even when disconnected from the computer.

Demonstration mode

If you have not downloaded a music file to the internal memory, you can start the demonstration mode of this device by switching to the Internal Memory Function.

This device comes preinstalled with sample music files (about 3.8 MB) for a demonstration.

After you download a music file, the demonstration mode does not work.

Downloadable file formats

ATRAC3

ATRAC3plus

MP3

WMA 1)

AAC

Linear PCM (WAV)

1)You cannot download a copyrighted file in this format.

Notes

You may not be able to download some files depending on your computer. For details, see “Playable/downloadable file formats” (page 62).

Some files are encoded into ATRAC3 (132 kbps) format when downloading. It may take a while to complete.

36