Connecting the Drive
You can connect this drive to a personal computer using the supplied i.LINK cable.
Notes
•When you connect, disconnect, or turn on or off the i.LINK device, the personal computer activates bus reset. If bus reset is activated while the personal computer is reading the data, the data might be damaged or lost. Be sure to quit all software before connecting or disconnecting this drive.
•Place this drive on a flat surface.
i.LINK connector
DC IN connector
i.LINK cable
i.LINK connector*
AC adapter AC power cord
To AC outlet
* Connect the i.LINK cable to the i.LINK connector of the port replicator on the personal computer.
1 Turn on the personal computer.
2 Connect the AC power cord to the supplied AC adapter, plug the AC power cord into an AC outlet, and then plug the cable of the adapter into the DC IN connector on the drive.
The green POWER indicator of the drive lights up.
12