3 Insert the four supplied R6 (size AA) batteries with the correct e E orientation.

4 Close the cover.

Connecting the receiver to the computer

Connect the receiver to the computer using the receiver cable.

To the computer’s (USB) port

When connecting the receiver to the computer for the first time

The first time the receiver is connected to the computer, the Windows operating system automatically installs the standard USB device driver.

Notes

•Drivers for USB devices must be installed for each port used. If you connect the receiver to a different USB port on your computer, the driver installation procedure will be repeated for that USB port.

•Connect the receiver only to a built-in USB port. Do not connect the receiver to an external USB hub.

Continued on next page

9 GB