Connecting and Setting Up the DTV

Completing i.LINK Setup

Before you can use an i.LINK device with the DTV, you need to register the device as follows.

1After you’ve connected the cables (as described on page 26), first turn on the DTV, and then turn on the i.LINK device(s). The following screen automatically appears.

To add the i.LINK device, highlight Add and press .

If you select Cancel, the i.LINK device is set up as “hidden” and it does not appear in the i.LINK Control Panel. To see the device in the i.LINK Control Panel, change the i.LINK Setup option from Hide to Show in the Setup menu (see page 59).

2If you selected Add in step 1, and the device requires an analog video connection, the following screen appears.

Depending on the i.LINK device you are setting up, this screen may not be displayed. In this case, the device’s video input will be displayed as N/A.

3Move the joystick V and v to highlight the video input (VIDEO 1-4)

that connects the i.LINK device to the DTV. If you don’t need an analog video connection, select None. Then press .

A confirmation screen appears, which indicates the i.LINK device name and video input. The device is now available in the i.LINK Control Panel (see page 42).

For more information

To change the setup of the i.LINK device, use the Setup menu. For details, see page 59.

For information on using the i.LINK Control Panel, see page 42.

For general information about i.LINK, see pag e67.

28