Other Information

Programming the Remote Control

The remote control is preset to operate Sony brand video equipment.

Sony

Switch Position

Programmable

Equipment

on Remote Control

Code Number

 

 

 

Beta, ED Beta VCRs

AV1

303

 

 

 

8 mm VCR

AV2

302

 

 

 

VHS VCR

AV3

301

 

 

 

DVD Player

DVD

751

 

 

 

 

 

 

 

If you have video equipment other than Sony brand that you want to

 

 

 

 

control with the DTV’s remote control, use the following procedures

 

 

 

 

to program the remote control.

 

 

3

 

 

 

✍ The equipment must have infrared (IR) remote capability in order to be used

 

 

 

 

 

2

with the remote control.

 

 

 

 

 

 

 

 

 

 

 

 

4

5

1Check the list of the “Manufacturer’s Codes” listed on page 64, and find the three-digit code number for the manufacturer for your equipment. (If more than one code number is listed, start with the number listed first.)

2Open the lid on the remote control. Then move the slide switch to one of the four positions (AV1, AV2, AV3, DVD).

3Press CODE SET.

✍You must perform step 4 within 10 seconds of step 3.

4Close the lid on the remote control and enter the three-digit manufacturer’s code number.

5Press ENTER.

6To check if the code number works, aim the DTV’s remote control at the equipment and press the green POWER button that corresponds with that equipment. If it responds, you are done. If not, try using another code listed for that manufacturer.

62