zYou can also use the Video Input option to assign video inputs to i.LINK devices. When you select that video input, an i.LINK connection is established. Only i.LINK devices that are set to Show (see “i.LINK Setup”) and which support video input connection are listed.

zFor details about using the i.LINK Control Panel, see page 42.

zFor details about power consumption in standby modes, see “Specifications” on page 70.

 

 

 

 

Using the DTV Menus

 

 

 

 

 

Option

Description

 

 

 

 

 

Video Input

Allows you to select labels to help you recognize devices

 

connected to the audio/video jacks on the DTV. For

 

example, if you have a DVD player connected to the

 

VIDEO 2 jack, you can select the label DVD for the VIDEO 2

 

input.

 

 

 

 

To select a label for a video input:

 

 

1 Move the joystick V or v to highlight the video input

 

(VIDEO 1-6) that you want to assign a label. Then

 

press

to select the input.

 

 

2 Move the joystick V or v to highlight one of the

 

displayed labels. Then press

to select it.

 

If you select the label Skip, your DTV skips this connection

 

when you press the TV/VIDEO button. i.LINK devices

 

cannot be assigned to VIDEO 5 or 6.

 

 

 

Language

Select to display all on-screen menus in your language of

 

choice (English, Espanol, Francais).

 

 

 

i.LINK Setup

Select to display a list of i.LINK devices that are connected

 

to the DTV. To change the status of an i.LINK device:

 

1 Move the joystick V or v to highlight an i.LINK

 

device. Then press

to select the device.

 

2 Move the joystick V or v to highlight one of the

 

following options. Then press

to select it.

 

 

 

 

Show

Select to display this device in the i.LINK

 

 

Control Panel.

 

 

 

 

 

Hide

Select to not display this device in the

 

 

i.LINK Control Panel. This is for devices that

 

 

are connected to, but not communicating

 

 

with, the DTV (or for devices that you don’t

 

 

want to appear in the i.LINK Control Panel).

 

 

 

 

Delete

Select for i.LINK devices that you have

 

 

disconnected from the DTV. To reconnect the

 

 

device, see page 28.

 

 

 

 

i.LINK Standby

On

Allows the i.LINK signal to pass through to

 

 

connected i.LINK devices even when the

 

 

DTV is turned off. Front panel LED is

 

 

orange. The DTV uses more standby power

 

 

than when this option set to Off.

 

 

 

 

Off

Does not allow the i.LINK signal to pass

 

 

through to connected i.LINK devices when

the DTV is turned off. Front panel LED is red. The DTV uses less standby power than when this option is set to On.

59