To connect an IBM PC/AT compatible computerWhen you use a USB mouse and USB equipment

Rear side

AUDIOMOUSE VIDEOS VIDEOINPUT A

 

 

Computer

to USB equipment

HD D-sub

 

15-pin cable

 

 

to monitor output

 

(supplied)

USB cable A type– B type (supplied)

to USB connector

 

Stereo audio connecting cable (not supplied)

to audio output

 

On the USB function

When connecting the projector to a computer by using the USB cable for the first time, the computer recognizes the following devices automatically.

1USB hub (general use)2USB human interface device (wireless mouse function)3USB human interface device (projector control function)

The computer also recognizes the device connected to the downstream connector on the projector.

Recommended operating environment

When you use the USB function, connect your computer as illustrated above. This application software and the USB function can be used on a computer loaded with Windows 98, Windows 98 SE or Windows 2000 preinstall models.

Notes

•As the projector recognizes the USB mouse when the computer is connected to the USB connector, do not connect anything to the PS/2 mouse port.

•Your computer may not start correctly when connected to the projector via the USB cable. In this case, disconnect the USB cable, restart the computer, then connect the computer to the projector using the USB cable.

•This projector is not guaranteed for suspend, standby mode. When you use the projector in suspend, standby mode, disconnect the projector from the USB port on the computer.

•Operations are not guaranteed for all the recommended computer environments.
Projecting and Up Setting

Connecting the Projector 17 GB