The INPUT SETTING MenuThe INPUT SETTING menu is used to adjust the input signal.

Items that cannot be adjusted depending on the input signal are not displayed in the menu.

For details on the unadjustable items, see page 40.

When the video signal is input

INPUT SETTING

VIDEO

ASPECT:

4 : 3

N o . 0 1

Memory

VIDEO/60

No.

Signal type

When the RGB signal is input

INPUT SETTING

 

INPUT-A

 

 

 

 

 

 

 

 

 

 

 

DOT PHASE:

1 5

 

 

 

 

 

 

 

 

SIZE H

8 0 0

 

 

 

 

 

 

 

 

 

 

 

 

 

SHIFT H

H : 2 0 0

V : 3 0

 

 

 

 

 

 

 

 

SCAN CONV:

ON

 

 

 

 

 

N o .

1 3

Memory

No.

640

480

Signal type

MENU ItemsDOT PHASE

Adjusts the dot phase of the LCD panel and the signal input from the INPUT A connector.

Adjust the picture further for finer picture after the picture is adjusted by pressing the APA key.

Adjust the picture to where it looks clearest.SIZE

Adjusts the horizontal size of picture input from the INPUT A connector. The higher

the setting, the larger the horizontal size of the picture. The lower the setting, the smaller the horizontal size of the picture. Adjust the setting according to the dots of the input signal.

For details on the suitable value for the preset signals, see page 41.SHIFT

Adjusts the position of the picture input from the INPUT A connector. H adjusts the horizontal position of the picture.V adjusts the vertical position of the picture. As the setting for H increases, the picture moves to the right, and as the setting decreases, the picture moves to the left.

As the setting for V increases, the picture moves up, and as the setting decreases, the picture moves down. Use the < or the , key to adjust the horizontal position and the

Mand m key for the vertical position.SCAN CONV (Scan converter)Converts the signal to display the picture according to the screen size.

ON: Displays the picture according to the screen size. The picture will lose some clarity.

OFF: Displays the picture while matching one pixel of input picture element to that of the LCD. The picture will be clear but the picture size will be smaller.

Note

This item will not be displayed in the following case.VPL-CS2: When SVGA, XGA or SXGA signal is inputVPL-CX1: When XGA or SXGA signal is input

GB 28 The INPUT SETTING Menu