How to use the adjusterTo adjust the height

Adjust the height of the projector as follows:

1 Lift the projector and press the adjuster adjustment buttons.

The adjusters will extend from the projector.

Adjuster adjustment buttons

2 While pressing the buttons, lower the projector. Then, release the buttons. For fine adjustment, turn the adjusters to the right and the left

to lower

to raise the

the

projector

projector

 

Notes

•Be careful not to let the projector down on your fingers.

•Do not push hard on the top of the projector with the adjusters out.

It may be occurred malfunction.

Control Panel1I / 1 (on/standby) key

Turns on and off the projector when the projector is in standby mode. The ON/ STANDBY indicator lights in green when the power is turned on.

When turning off the power, press the I / 1 key twice following the message on the screen, or press and hold the key for about one second.

For details on steps for turning off the power, see “To turn off the power” on page 23.

2INPUT key

Selects the input signal. Each time you press the key, the input signal switches as follows:

INPUT A t MS tVIDEO t S VIDEO

t

3Speakers4APA (Auto Pixel Alignment) key

Adjusts a picture clearest automatically while a signal is input from a computer.

5ENTER key

Enters the settings of items in the menu system.

6 MENU key

Displays the on-screen menu. Press again to clear the menu.

GB 10 Location and Function of Controls