seconds. During this time, you cannot light up the ON/STANDBY indicator with the I / 1 key.

For details on the LAMP/COVER and the TEMP/FAN indicators, see on pages 34, 35.

6Security lock (right side)

Connects to an optional security cable (Kensington’s).

The security lock corresponds to Kensington’s MicroSaver® Security System.

If you require further information, contact

Kensington

2855 Campus Drive San Mateo, CA 94403

In North America

Phone: 800-235-6708

Fax: 800-247-1317

Outside North America

Phone: 847-541-9500

Home page address:

http://www.kensington.com/

7Control panel

For details, see “Control Panel” on page 10.

8Ventilation holes (exhaust)9Focus lever

Adjusts the picture focus.

q; Zoom lever

Adjusts the picture size.

qa Adjuster adjustment buttons

For details,see “How to use the adjuster” on page 10.

qs AC IN socket

Connects the supplied AC power cord.

qd Ventilation holes (intake)/air filter cover

Notes

 

 

• Do not place anything near the

 

ventilation holes as it may cause internal

 

 

heat build-up.

 

 

 

• Do not place your hand or objects near

 

 

 

 

the ventilation holes as it may cause the

 

 

Overview

air coming out heat build-up.

 

• To maintain optimal performance, clean

 

the air filter every 300 hours.

 

qf Connector panel

For details, see “Connector Panel” on page 11.

qg Rear remote control detector (SIRCS receiver)How to open/close the front coverTo open the front cover

Press the OPEN button.

The front cover is opened and set on the top panel of the projector.

To close the front cover

Restore the front cover by hand.

Note

Do not tilt the projector out of the range of the adjuster setting when you open the front cover. If the projector is tilted too much, the front cover opens speedily or slowly.

Location and Function of Controls 9 GB