Projecting
Rear remote control detector
FREEZE MS SLIDE I / 1
D KEYSTONE
INPUTAPA
MENUENTER
ON/STANDBY indicators
1 Open the front cover, plug the AC power cord into a wall outlet, then connect all equipment.
The ON/STANDBY indicator lights in red and the projector goes into standby mode.
2 Press the I / 1 key.The ON/STANDBY indicator lights in green.3 Turn on the equipment connected to the projector. 4 Press the INPUT key to select the input source.
| To input from | Press INPUT to display |
|
|
Computer connected to the INPUT A connector | INPUT A |
|
|
| Memory Stick inserted to the Memoty Stick slot | MS |
|
|
Video equipment connected to the VIDEO input | VIDEO |
connector |
|
|
|
Video equipment connected to the S VIDEO input | S VIDEO |
connector |
|
|
|
Projecting and Up Setting
Projecting 21 GB