BAdjustments and Settings Using the Menu
The projector is equipped with an
To change the menu language, see “Selecting the Menu Language” on page 19.
1 Press the MENU key.The menu appears.
The menu presently selected is shown as a yellow button.
PICTURE CTRL | |
| |
CONTRAST: | 8 0 |
BRIGHT: | 5 0 |
RGB ENHANCER: | 3 0 |
GAMMA MODE: | GRAPHICS |
COLOR TEMP: | HIGH |
VOLUME: | 5 0 |
The selected menu appears.
Menus | Setting items |
SET SETTING | |
| |
STATUS: | ON |
COMPUTER | |
AUTO INPUT SEL: OFF | |
LANGUAGE: | ENGLISH |
POWER SAVING: | OFF |
•When changing the adjustment level: To increase the number, press the Mor ,key.
To decrease the number, press the m or < key.
Press the ENTER key to restore the original screen.
•When changing the setting:
Press the M or mkey to change the setting.
Press the ENTER or <key to restore the original screen.
To clear the menu
Press the MENU key.
The menu disappears automatically if a key is not pressed for one minute.
To reset items that have been adjusted
Press the RESET key.
“Complete!” appears on the screen and the settings appearing on the screen are reset to their factory preset values.
Items that can be reset are:
•“CONTRAST,” “BRIGHT,” “COLOR,” “HUE,” “SHARP”, and “RGB ENHANCER” in the PICTURE CTRL menu
•“DOT PHASE,” “SIZE H,” and “SHIFT” in the INPUT SETTING menu
•“DIGIT KEYSTONE” in the INSTALL SETTING menu.
About the memory of the settings
The settings are automatically stored in the projector memory.
If no signal is input
If there is no input signal, “NO INPUT– Cannot adjust this item.” appears on the screen.
About the menu display
You can set the display position of the menu, intensity of the background picture and tone of the menu items as you like.
For details, see page 30.
Menu the Using Settings and Adjustments
Using the MENU 25 GB