Sony VPL-EX3 Indicators, Symptom, Indicators, Cause and Remedy, Status and Remedy

Symptom	Cause and Remedy
The image extends beyond	The APA key has been pressed even though there are black edges
the screen.	around the image.
	c Display the full image on the screen and press the APA key.
	c Adjust “Shift” on the INPUT SETTING menu properly.
The picture flickers.	“Dot Phase” on the INPUT SETTING menu has not been adjusted
	properly.
	c Adjust “Dot Phase” on the INPUT SETTING menu properly.

Indicators

Indicators	Status and Remedy
POWER SAVING	Lights up when the projector is in power saving mode.
TEMP/FAN	Lights up when temperature inside the projector becomes unusually
	high. Check to see if anything is blocking the ventilation holes.
	Flashes when the fan is broken. Consult with qualified Sony
	personnel.
LAMP/COVER	Lights up when the lamp has reached the end of its life or becomes a
	high temperature. Wait to cool down the lamp and turn on the power
	again, or replace the lamp.
	If it lights after you replaced the lamp, the electrical system may
	have broken down. Consult with the qualified Sony personnel.
	Flashes when the lamp cover or the air filter cover is not secured
	firmly. Attach the cover securely.
I/1 indicator	Lights in red in standby mode. You can turn on the projector with
	the I/1 key.
	Lights in green when the power is turned on.
	Flashes in green from the projector is turned on until the projector is
	ready to operate. Also, flashes in green while the cooling fan runs
	after the power is turned off with the I/1 key. During this time, you
	will not be able to turn on the projector.

Troubleshooting 13 GB