–Flashes in red when the internal temperature is high or the electrical system has failed.

–Lights in green when the projector is turned on, and when it is ready to operate.

–Flashes in green from the time when the projector is turned on until the projector is ready to operate. Also, flashes in green while the cooling fan is running after the power is turned off with the ?/1 key. The fan runs for about 90 seconds after the power is turned off.

–Lights in orange when the power saving mode is on.

For details, see pages 21 and 45.

cSHIFT key

Enters the H/V shift adjustment mode. Next, adjust the vertical/horizontal position of the picture using the arrow keys. Press the v key to move the picture upward. Press the V key to move it downward. Press the b key to move it leftward. Press the B key to move it rightward.

Note

Do not perform the lens shift operation when the VPLL-1008 is attached to the projector because the projector is installed with the center of the lens aligned with the center of the screen.

dZOOM key

Enters the zoom adjustment mode. Next, adjust the picture size using the arrow keys. Press the v or B key to enlarge the picture size, and the V or b key to reduce it.

eFOCUS key

Enters the focus adjustment mode. Next, adjust the focus using the arrow keys. Press the v or B key to focus on a picture further back, and the V or b key to focus on a picture further forward.

The ZOOM and FOCUS keys cannot be used when you attach the optional lens VPLL-1008 to the projector.

fMENU key

Displays the on-screen menu. Press again to clear the menu.

g?/1 (On/Standby) key

Turns on the projector when it is in standby mode. When you push this key, the ON/STANDBY indicator flashes in green and then lights in green when the projector is ready to operate.

To turn off the power, press the ?/1 key twice according to the message or hold the ?/1 key for about one second.

hINPUT key

Select the input signal. Each time you press the key the input signal switches.

iENTER/v/V/b/B (Arrow) keys

Used to enter the settings of items in the menu system, select a menu, or make various adjustments.

Connector Panel

1 2 3

4 5 67 8 90

aVIDEO IN (Video input)

Connects to external video equipment .

S VIDEO (mini DIN 4-pin)

Connects to the S video output (Y/C video output) of video equipment.

VIDEO (phono type)

Connects to the composite video output of video equipment.

AUDIO input L (MONO)/R (phono type)

Connect to the audio output of video equipment. For stereo equipment use both the L and R jacks; for monaural equipment use the L (MONO) jack only.

12 Location and Function of Controls