4 Press the INPUT key to select the input source.
You can select directly the input signal you want to project by pressing one key from among INPUT A, B, C, D or E on the Remote Commander.
Each time you press the INPUT key on the control panel, the input signal switches as follows:
| To input from | Press INPUT |
| to display |
|
|
Computer, etc. | |
connected to the |
|
INPUT A connector |
|
|
|
Computer, etc. | |
connected to the |
|
INPUT B connector |
|
|
|
Computer/VCR, etc. | |
connected to INPUT C |
|
connector |
|
|
|
Computer/VCR, etc. | |
connected to INPUT D |
|
(Digital) connector |
|
|
|
Computer connected to | |
LAN to use the network |
|
presentation function |
|
|
|
Video equipment | Video |
connected to the VIDEO |
|
input connector |
|
|
|
Video equipment | |
connected to the |
|
S VIDEO input |
|
connector |
|
|
|
Smart APA (Auto Pixel Alignment) adjusts the picture of the connected equipment so that it is projected clearly.
Notes
•If “Auto Input Search” is set to “On,” the projector searches for the signals from the connected equipment and displays the input channel where the input signals are found.
For details, see “Auto Input Search” in the Function menu on page 34.
•The Smart APA feature is effective for the input signal from a computer only.
5 Switch the equipment connected to output to the projector.
Depending on the type of your computer, for example a notebook, or an
/
, etc.), or by changing
your computer’s settings.
F7
or 
Fx
and
Fn
Note
The key used for switching the computer to output to the projector varies depending on the type of computer.
6 Adjust the upper, lower, left or right position of the picture using the M/m/ </, key while pressing the SHIFT key.
7 Adjust the size of the picture and the focus.
Press the FOCUS key and adjust the focus using the M/m/</, keys. Press the ZOOM key and adjust the size of the picture using the M/m/</, keys.
Note
The
20 Projecting