Notes

Be careful not to touch the glass surface of the lamp.

The power will not turn on if the lamp is not secured properly.

6 Restore the lamp cover to the original position and tighten the three screws with the phillips screwdriver.

Note

Be sure to attach the lamp cover securely as it was. If not, the projector cannot be turned on.

7 Connect the power cord.

The ON/STANDBY indicator lights in red.

8 Press the ?/1 key to turn the projector on.

9 Press the MENU key, and then select the Setup menu.

10Select “Lamp Timer Reset”, and then press the ENTER key.

A message is displayed.

11Select “Yes”, and then press the ENTER key.

The Lamp Timer is initialized to 0, and “Lamp Timer Reset Complete!” is displayed in the menu screen.

12Select “OK.”

Caution

Do not put your hands into the lamp replacement slot, and do not allow any liquid or other objects into the slot to avoid electrical shock or fire.

Note

To erase a message, press any key on the control panel of the projector or on the Remote Commander.

Disposal of the used lampFor the customers in the USA

Lamp in this product contains mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (www.eiae.org).

Maintenance

Replacing the Lamp 41