Setting items | Functions | Initial setting |
|
|
|
Panel Key Lock | Locks all the control panel keys on the side panel of | Off |
| the projector so that the projector can be operated only |
|
| with the Remote Commander. |
|
| To lock the control panel keys, set to “On.” |
|
| When it is set to “On,” keeping the ?/1 key on the |
|
| control panel pressed for 10 seconds turns the projector |
|
| on when it is in standby mode, and turns the projector |
|
| to standby mode when the power is on. If you press |
|
| and hold the MENU key for about 10 seconds when |
|
| the power is on, the lock will be released and “Panel |
|
| Key Lock” is automatically set to “Off.” |
|
|
|
|
Security Lock | Turns on the projector’s security lock function. | Off |
| When set to “On,” turns on the security lock function, |
|
| which locks the projector once a password has been |
|
| set. |
|
| For details, see “Security Lock” on page 23. |
|
|
|
|
Notes
•Press the APA key when the full image is displayed on the screen. If the projected image includes a black portion around it, the APA function will not work properly and some parts of the image may not be displayed on the screen.
•You can cancel the adjustment by pressing the APA key again while “Adjusting” appears on the screen.
•The picture may not be adjusted properly depending on the type of input signal.
•Adjust the “Phase,” “Pitch,” and “Shift” items in the Screen menu when you adjust the picture manually.
Menu a Using Settings and Adjustments
The Function Menu 35