Other Functions
Direct Power On/Off Function
If you will be using a circuit breaker to turn the power for the entire system on and off, set the direct power on function to “On.” When you turn off the power, you can also just unplug the power cord without pressing the ?/1 key. The internal circuitry will cause the fan to automatically operate for a certain time even after the power cord is removed.
Note
However, if the projector has been on for less than 15 minutes, the fan might not turn enough as a result of inadequate charging. In that case, follow the procedure for turning off the power as described in “Turning Off the Power” on page 21.
Off & Go Function
If you are leaving the conference room immediately, turn the projector off, and then, you can unplug the AC power cord. After the AC power cord is unplugged, the fan runs for a certain time automatically.
Note
However, if the projector has been on for less than 15 minutes, the fan might not turn enough as a result of inadequate charging. In that case, follow the procedure for turning off the power as described in “Turning Off the Power” on page 21.
Effective Tools for Your Presentation
To freeze the image projected (Freeze function)
Press the FREEZE key. “Freeze” appears when the key is pressed. This function works when a signal from a computer is input.
To restore the original screen, press the FREEZE key again.
Controlling the Computer Using a Presentation Tool, RM-PJPK1 (not supplied)
(When Using the Network Presentation Function)
When you are using the network presentation function to project the picture from a computer, you can perform some operations for a slide show using a presentation tool (not supplied). The following keys on the presentation tool are usable.
Key | Function |
LASER | Emits a laser beam.* |
G SLIDE g | Changes the slides in |
| the forward/backward |
| direction. |
|
|
B | Displays/cancels a |
| black screen during the |
| slide show. |
|
|
*Even if the network presentation function is not used, the LASER key can be used.
Notes
•If there is any obstruction between the presentation tool and the remote control detector on the projector, the presentation tool may not function properly.
•A black screen may not be displayed even if you press the “B” key depending on the operating system (OS) of the language of your computer.
•When you use the presentation tool, set “ID Mode” in the Installation menu to “All” or “1.”
Functions Convenient
Other Functions 25