The Installation Menu
The Installation menu is used for changing the settings of the projector.
Lamp Mode | Standard |
ID Mode | All |
Illumination |
|
Direct Power On |
|
Setting items | Functions | Initial setting | |
|
|
| |
V Keystone | Corrects the vertical trapezoidal distortion of the picture. | 0 | |
| When the bottom of the trapezoid is longer than the top |
| |
| ( | ): Sets a lower value (– direction) |
|
| When the top of the trapezoid is longer than the bottom |
| |
| ( | ): Sets a higher value (+ direction). |
|
|
|
| |
Image Flip | Flips the picture on the screen horizontally and/or | Off | |
| vertically. |
| |
| Use this item for installation for the backside projection or |
| |
| ceiling installation. |
| |
| • HV: Flips the picture horizontally and vertically. |
| |
| • H: Flips the picture horizontally. |
| |
| • V: Flips the picture vertically. |
| |
| • Off: The picture does not flip. |
| |
|
|
| |
Lamp Mode | Sets the lamp brightness used during the projection. | Standard | |
| • High: Illuminates the projected image brightly. |
| |
| • Standard: Reduces fan noise and power consumption. |
| |
|
| The brightness of the projected image will be lower |
|
|
| compared with the “High” setting. |
|
|
|
| |
Lens Control | Avoids any operation of the lens such as “Focus,” “Zoom,” | On | |
| and “Shift,” by mistake. |
| |
|
| When set to “On,” you can adjust the projection lens |
|
|
| using “Focus,” “Zoom,” and “Shift.” After you make this |
|
|
| adjustment, it is recommended that you set this item to |
|
|
| “Off” to avoid any operation of the lens. When set to |
|
|
| “Off,” the FOCUS, ZOOM and SHIFT keys do not work. |
|
|
|
| |
IR Receiver | Selects the remote control detectors (IR Receiver) on the | Front & Rear | |
| front and rear of the projector. |
| |
| • Front & Rear: Activates both the front and rear |
| |
|
| detectors. |
|
| • Front: Activates the front detector only. |
| |
| • Rear: Activates the rear detector only. |
| |
|
|
|
|
36 The Installation Menu