On repacking

Save the original shipping carton and packing material; they will come in handy if you ever have to ship your unit. For maximum protection, repack your unit as it was originally packed at the factory.

On LCD projector

The LCD projector is manufactured using high-precision technology. You may, however, see tiny black points and/or bright points (red, blue, or green) that continuously appear on the LCD projector. This is a normal result of the manufacturing process and does not indicate a malfunction.

Notes on Installation and Usage

Unsuitable Installation

Do not install the unit in the following situations. These installations may cause malfunction or damage to the unit.

Poorly ventilated

Allow adequate air circulation to prevent internal heat build-up. Do not place the unit on surfaces (rugs, blankets, etc.) or near materials (curtains, draperies) that may block the ventilation holes.

When the internal heat builds up due to the block-up, the temperature sensor will function with the message “High temp.! Lamp off in 1 min.” The power will be turned off automatically after one minute.

Leave space of more than 30 cm (11 7/8 inches) around the unit.

Be careful that the ventilation holes may inhale tininess such as a piece of paper.

Highly heated and humid

Avoid installing the unit in a location where the temperature or humidity is very high, or temperature is very low.

To avoid moisture condensation, do not install the unit in a location where the temperature may rise rapidly.

6 Notes on Installation and Usage