Troubleshooting

If the projector appears to be operating erratically, try to diagnose and correct the problem using the following instructions. If the problem persists, consult with qualified Sony personnel.

For details on the symptoms, see the Operating Instructions contained in the CD-ROM.

Power
SymptomCause and Remedy

 

 

The power is not turned on.

• The power has been turned off and on with the I / 1 key at a short

 

interval.

 

c Wait for about 60 seconds before turning on the power.

 

• The lamp cover is detached.

 

c Close the lamp cover securely.

 

• The air filter cover is detached.

 

c Close the air filter cover securely.

 

 

Picture

Symptom

Cause and Remedy

 

 

No picture.

• Cable is disconnected or the connections are wrong.

 

c Check that the proper connections have been made.

 

• Input selection is incorrect.

 

c Select the input source correctly using the INPUT key.

 

• The picture is muting.

 

c Press the PIC MUTING key to release the muting function.

 

• The computer signal is not set to output to an external monitor or

 

set to output both to an external monitor and a LCD monitor of a

 

computer.

 

c Set the computer signal to output only to an external monitor.

 

c Depending on the type of your computer, for example a

 

notebook, or an all-in-one LCD type, you may have to switch

 

the computer to output to the projector by pressing certain keys

 

or by changing your computer’s settings.

 

For details, refer to the computer’s operating instructions

 

supplied with your computer.

 

• The signal is input from the computer to the INPUT C connector.

 

c Change the setting on your computer to disable the DDC

 

function.

 

 

The picture is noisy.

• Noise may appear on the background depending on the

 

combination of the numbers of dot input from the connector and

 

numbers of pixel on the LCD panel.

 

c Change the desktop pattern on the connected computer.

 

 

The picture from INPUT C

• Setting for Input-C Signal Sel. in the SET SETTING menu is

connector is colored

incorrect.

strange.

c Select Computer, Video GBR or Component for Input-C Signal

 

Sel. in the SET SETTING menu according to the input signal.

 

 

Troubleshooting 13GB