Sony VPL-HS10 17 GB, 6 Adjust the size and position of the picture to fit the screen

6 Adjust the size and position of the picture to fit the screen.

When projecting using both “Side Shot” and “V Keystone” adjustments

1Use the adjuster to adjust the vertical position.

If you set “V Keystone” in the INSTALL SETTING menu to “Auto” (1 page 29), the vertical distortion will be automatically corrected. For how to use the adjuster, see “Using the adjuster” on page 18.

Note

The “V Keystone” adjustment may not correct trapezoidal distortion perfectly, depending on the room temperature or the screen angle.

2Adjust so that the left or right side of the picture fits that of the screen.

If you position the projector on the left side of the screen, adjust so that the left side of the picture fits the left side of the screen. With the projector positioned on the right side, adjust so that the right side fits the right side of the screen.

At the same time, align the bottom side of the picture with that of the screen.

Screen

Picture

3Adjust to correct horizontal trapezoidal distortion using the SIDE SHOT + or – button.

Press SIDE SHOT + or – so that the upper side of the picture becomes parallel to the bottom side. If the left side is longer than the right side, press SIDE SHOT –.

SIDE SHOT Preparations andConnections

Press SIDE SHOT + if the right side is longer. To fine- adjust the distortion, press M or m.

When projecting using “Side Shot” adjustment only

1Set “V Keystone” in the INSTALL SETTING

to “Manual,” and set the level to “0” ( 1 page 29) or press RESET.

2Adjust so that the left or right side of the picture fits that of the screen.

If you position the projector on the left side of the screen, adjust so that the left side of the picture fits the left side of the screen. With the projector positioned on the right side, adjust so that the right side fits the right side of the screen.

At the same time, adjust the vertical size of the aligned side of the picture to fit the screen using ZOOM +/–.

Screen

Picture

3Adjust to correct horizontal trapezoidal distortion using the SIDE SHOT + or – button.

For how to correct, see step 3 in “When projecting using both “Side Shot” and “V Keystone” adjustments.”

Step 3: Adjusting the Picture Size and Position 17 GB