Sony VPL-HS10 Specifications, System, Input/Output

2Open the filter cover while pushing the filter lock knobs inward.

3Remove the air filter from the projector by holding the tab on the filter cover.

4Insert the new air filter into the projector.

5Replace the filter cover.

SpecificationsSystem

Projection system
	3 LCD panels, 1 lens, projection
	system
LCD panel	0.87-inch TFT LCD panel, 3,276,504
	pixels (1,092,168 pixels × 3)
Lens	1.3 times zoom lens (powered)
	f33.6 - 42 mm/F1.85 - 2.2
Lamp	180 W UHP type
Projection picture size
	Range: 40 to 300 inches (measured
	diagonally)
Color system	NTSC3.58/PAL/SECAM/NTSC4.43/
	PAL-M/PAL-N system, switched
	automatically/manually
Acceptable video signals
	15 kHz RGB/component 50/60 Hz,
	Progressive component 50/60 Hz,
	DTV (480/60i, 575/50i, 480/60p,
	575/50p, 720/60p, 720/50p, 1080/
	60i, 1080/50i), 1080/24PsF,
	Composite video, Y/C video
Acceptable computer signals
	fH: 19 to 72 kHz
	fV: 48 to 92 Hz
	Maximum resolution XGA 1024 ⋅
	768, fV: 85 Hz
Speaker	33 mm (1 5/16 inches) diameter,
	max. 2 W ⋅ 2 (available only for

using a “Memory Stick”)

Input/Output

Video input	VIDEO: phono type
	Composite video: 1 Vp-p±2 dB
	sync negative (75 ohms terminated)
	S VIDEO: Y/C mini DIN 4-pin type
	(male)
	Y (luminance): 1 Vp-p±2 dB sync
	negative (75 ohms terminated)
	C (chrominance): burst 0.286 Vp-p
	±2 dB (NTSC)
	(75 ohms terminated)
	burst 0.3 Vp-p±2 dB (PAL)
	(75 ohms terminated)
Y/PB/CB/PR/CR	Component: phono type
	G with Sync/Y: 1 Vp-p±2dB sync
	negative (75 ohms terminated)
	B/CB/PB: 0.7 Vp-p±2dB positive
	(75 ohms terminated)
	R/CR/PR: 0.7 Vp-p±2 dB positive
	(75 ohms terminated)

Others

Specifications 55 GB