Cannot play

c The MS SLIDE button has been pressed

 

while no movie picture files are

 

contained in the selected folder. Slide

 

show will not start.

 

 

Cannot play

c Image data of a movie picture file is

 

broken.

 

 

Memory Stick

c The erasure prevention switch on a

locked

“Memory Stick” is set to “LOCK.”

 

Release the lock.

 

 

Memory Stick

c The “Memory Stick” is broken.

error

c Clean the terminal on the “Memory

 

Stick.”

 

 

Memory Stick

c A “Memory Stick” that is not

type error

compatible or cannot be used with the

 

projector has been inserted.

 

 

Format error

c The“Memory Stick” has not been

 

formatted correctly. Format it on this

 

projector correctly.

 

c Formatting is not successful.

 

 

File error

c The selected folder has not been named

 

correctly. Reenter the name with less

 

than 66 characters including “/” by

 

displaying the “Select Folder” menu.

 

 

Read Only

c A read-only “Memory Stick” in which

Memory

picture files are recorded has been

 

inserted. You cannot record or delete

 

the data with a read-only “Memory

 

Stick.”

 

 

Caution displays while you are using the “Memory Stick”

If a picture file has some problem, the following indicator may appear on the screen. Check the following to cope with the corresponding situation.

cThe image data is the JPEG or MPEG1 format that is not-compatible.

cThere is the thumbnail but it is not DCF-

compatible.

cThere is no selected image data.

cThere is the image data but the thumbnail is

broken.

c The image data is broken.

Replacing the Lamp

The lamp used for the light source has a certain life. When the lamp dims, the color balance of the picture becomes strange, or “Please replace the LAMP.” appears on the screen, the lamp is exhausted. Replace the lamp with a new one (not supplied).

Use LMP-H180 Projector Lamp as the replacement lamp.

When replacing the lamp after using the projector

Turn off the projector, then unplug the power cord. Wait for at least an hour for the lamp to cool.

Caution

The lamp becomes a high temperature after turning off the projector with the [/1 (on/standby) switch. If you touch the lamp, you may scald your finger. When you replace the lamp, wait for at least an hour for the lamp to cool. When removing the lamp unit, make sure it remains horizontal, then pull straight up. Do not tilt the lamp unit. If you pull out the lamp unit while tilted and if the lamp breaks, the pieces may scatter, causing injury.

1Place a protective sheet (cloth) beneath the projector. Turn the projector over so you can see its underside.

Note

Be sure that the projector is stable after turning it over.

Others

Replacing the Lamp 53 GB