Sony VPL-HS10 Indicators, Warning messages, Caution messages, Caution regarding messages while using the “Memory Stick”

A still picture in the	c Release the lock for the write-
“Memory Stick”	protect tab on the “Memory
cannot be rotated or	Stick”. (1 page 32)
deleted.	c Release the protect in the index
	screen. (1 page 42)
The “Memory Stick”	c Release the lock for the write-
cannot be formatted.	protect tab on the “Memory
	Stick”. (1 page 32)
	c The “Memory stick” is broken.
	Use another “Memory Stick”.
The thumbnails are not	c The pictures are the JPEG
displayed.	format but not DCF-compatible.
	Use the DCF-compatible
	pictures.
The still pictures files	c Set “Filter” in the “Option”
in the JPEG format	menu to “Still” or “Off.”
stored in a “Memory
Stick” cannot be
displayed.
The movie picture files	c Set “Filter” in the “Option”
in the MPEG1 format	menu to “Movie” or “Off.”
stored in a “Memory
Stick” cannot be
displayed.

Indicators

The LAMP/COVER or TEMP/FAN indicator on the control panel lights up or flashes if there is any trouble with your projector.

LAMP/COVER Indicator

TEMP/FAN Indicator

LAMP/	TEMP/	POWER	ON/
COVER	FAN	SAVING	STANDBY

	LAMP/COVER	c Attach the lamp cover or the air filter
	flashes.	cover securely. (1 pages 53 and 54)
	LAMP/COVER	c The lamp has reached the end of its
	lights up.	life. Replace the lamp. (1 pages 53)
		c The lamp becomes a high temperature.
		Wait for one minute to cool down the
		lamp and turn on the power again. (1
		page 22)
	TEMP/FAN	c The fan is broken. Consult with
Others	flashes.	qualified Sony personnel.
	TEMP/FAN	c The internal temperature is unusually
	lights up.	high. Check to see if nothing is
		blocking the ventilation holes.
	LAMP/COVER	c The electrical system breaks down.
	and TEMP/FAN	Consult with qualified Sony
	light up.	personnel.

Warning messages

Use the list below to check the meaning of the messages displayed on the screen.

High temp.!	c Turn off the power.
Lamp off in 1	c Check to see if nothing is blocking the
min.	ventilation holes.
Frequency is	c Input a signal that is within the
out of range!	acceptable range of the frequency.
	c Set the output signal on an external
	monitor of the connected computer to
	SVGA.
Please check	c Set “Input-A Signal Sel.” in the SET
Input-A Signal	SETTING	menu to “Computer”
Sel.	when RGB signal is input from the
	computer. (1 page 29)
Please check	c Set “Digital Signal Sel.” in the SET
Digital Signal	SETTING	menu to “Computer”
Sel.	when RGB signal is input from the
	computer.(1 page 29)
	Note
	Before you change the “Digital Signal Sel.”
	setting, disconnect the DVI cable and turn off the
	digital tuner, etc.
Please replace	c It is time to replace the lamp. Replace
the LAMP.	the lamp. (1 page 53)
Please replace	c It is time to replace the air filter. Replace
the filter.	the air filter. (1 page 54)

Caution messages

Use the list below to check the meaning of the messages displayed on the screen.

NO INPUT c No signal is input. Check connections. (1 page 13)

Not applicable! c Press the appropriate button.

Caution regarding messages while using the “Memory Stick”

Use the list below to check the meaning of the messages.

No Memory	c Insert the “Memory Stick” into the
Stick	“Memory Stick” slot correctly.
No file	c No picture files are contained in the
	currently selected folder.
No movie file	c No movie picture files are contained in
	the currently selected folder although
	“Filter” is set to “Movie” in the
	“Option” menu.
No still file	c No still picture files are contained in the
	currently selected folder although
	“Filter” is set to “Still” in the “Option”
	menu.

GB 52 Troubleshooting