Step 2: Connecting the Projector

When making connections, be sure to do the following:

Turn off all equipment before making any connections.

Use the proper cables for each connection.

Insert the cable plugs properly; plugs that are not fully inserted often generate noise. When pulling out a cable, be sure to pull it out from the plug, not the cable itself.

Refer to the operating instructions of the connected equipment.

Connecting to a DVD Player/Recorder or Digital Tuner

To connect to a DVD player/recorder or digital tuner equipped with component video connectors

Speakers

AV amplifier

Rear of the projector

DVD player/recorder, digital tuner, etc., with component video connectors

Preparations and Connections

HDMI

Y

PB/CB PR/CR VIDEO S VIDEO

 

 

INPUT

Y PB/

PR/CR

Y

PB/

PR/CR

 

CB

 

CB

 

 

 

 

 

 

 

Component video cable (not supplied)

: Video signal flow

Tip

To connect the projector to a DVD player/recorder, digital tuner, etc. which is not equipped with component video connectors, use the S video cable to connect to the S- video output of the DVD player/recorder, digital tuner, etc. If the connected equipment is not equipped with the S-video output connector, use the video cable to connect to the video output jack on the equipment.

Step 2: Connecting the Projector 13