Item | Description | |
|
| |
Adjust Picture |
| |
|
|
|
| Black Level Adj | Emphasizes black color to produce a bolder “dynamic” picture. Set |
| (Adjust) | according to the input signal source. |
|
| High: Gives higher emphasis to the black color. |
|
| Low: Gives lower emphasis to the black color. |
|
| Off: Cancels this feature. |
|
|
|
| Gamma Correction | Selects a favorite tone from three options. |
|
| Off: The feature does not function. |
|
| Gamma1: Makes the dark portion of a scene a little brighter. |
|
| Gamma2: Makes the dark portion of a scene brighter than that in |
|
| Gamma1. |
|
| Gamma3: Makes the whole scene brighter. |
|
| For the |
|
| Using the specified controller, “ImageDirector*” supplied as a CD- |
|
| ROM allows you to adjust, set and store a favorite tone. Adjustable |
|
| range is limited. |
|
| * For detailed operations of “ImageDirector,” refer to the Operating |
|
| Instructions stored in the supplied |
|
| cannot be used with Macintosh. |
|
|
|
| Color Temp. | High: Gives the white colors a blue tint. |
|
| Middle: Gives the white colors a neutral tint. |
|
| Low: Gives the white colors a red tint. |
|
| Custom1, Custom2, Custom3: Enables you to adjust, set and store |
|
| the favorite color temperature. |
|
|
|
| DDE (Dynamic Detail | Off: Plays a video signal in an interlace format without converting. |
| Enhancer) | Progressive: Converts an interlace format video signal to a |
|
| progressive format. |
|
| Film: Normally, select this option. Reproduces the |
|
| film sources with smooth picture movement. When the video |
|
| signal with a format other than the |
|
| “Progressive” is automatically selected. |
|
|
|
| Cinema Black Pro | Advanced Iris |
|
| Switches the iris function during projection. |
|
| Off: Normal contrast. |
|
| On: Enhances the black by emphasizing the contrast. |
|
| Auto: Automatically switches to an optimum iris according to a |
|
| projected scene. The contrast of the scene is emphasized most. |
|
|
|
|
| Lamp Control |
|
| Switches the lamp wattage during projection. |
|
| High: Normal wattage. |
|
| Low: Enhances the black by reducing the lamp wattage. |
|
| Tip |
|
| If “Lamp Control” is set to “Low,” the next time the power is turned |
|
| on, the lamp will use the “High” setting initially, and then go to |
|
| “Low.” |
|
|
|
38 Picture Menu