Sony VPL-HS50 Turning Off the Power, 2 Press the I/1 switch again, 1 Press the I/1 (on/standby) switch, 6 Turn the focus ring to adjust the focus

6 Turn the focus ring to adjust the focus.

Adjust to obtain sharp focus.

Projecting

Focus ring

Turning Off the Power1 Press the I/1 (on/standby) switch.

A message “POWER OFF?” appears on the screen.

2 Press the I/1 switch again.

The ON/STANDBY indicator flashes in green and the fan continues to run to reduce the internal heat. First, the ON/STANDBY indicator flashes quickly, during which you will not be able to light up the ON/STANDBY indicator with the I/1 switch.

3 Unplug the AC power cord from the wall outlet after the fan stops running and the ON/STANDBY indicator lights in red.

You can turn off the projector by holding the I/1 (on/standby) switch for about one second, instead of performing the above steps.

Projecting the Picture on the Screen 25