Connecting to a Computer

Rear of the projector

Computer

PR/CR VIDEO S VIDEO

INPUT A

INPUT

 

to monitor output

HD D-sub 15-pin cable (not supplied)

: Video signal flow

Tip

Set “Input A Signal Sel.” in the Setup menu to “Auto” or “Computer.” If the input signal does not appear properly, set it to “Computer.”

Note

If you set your computer, such as a notebook type, to output the signal to both your computer’s display and an external monitor, the picture of the external monitor may not appear properly. Set your computer to output the signal to only the external monitor. For details, refer to the computer’s operating instructions supplied with your computer.

16 Step 2: Connecting the Projector