Adjusting the Picture Using Real Color Processing

The Real Color Processing (RCP) feature allows you to adjust the color and hue of each target of the projected picture you specify independently. You can thus obtain a picture more suitable to your taste.

LIGHT

INPUT

 

DYNAMIC

STANDARD

CINEMA

 

PICTURE MODE

 

USER 1

USER 2

USER 3

 

ENTER

 

APA

ADJ PIC

MENU

WIDE MODE

RCP

RESET

REAL COLOR PROCESSING

BRIGHT CONTRAST

2 – 4

1

Tip

Freeze the scene of the video source when you are adjusting the picture using Real Color Processing.

1 Press RCP on the remote control.2 Press M or m to select “User 1,” “User 2” or “User 3,” then press ,.

The RCP (Real Color Processing) window appears.

3 Select the target color you want to adjust.

Repeat steps 1 and 2 described below to specify the target color.

1Press M or m to select “Color Select,” then press < or , to select the color you want to adjust among “Red,” “Magenta,” “Blue,” “Cyan,” “Green” and “Yellow.”

Only the portions that correspond to the specified color will be colored and the other portions will be displayed in black and white. The reference palette in the RCP window also shows the adjustable colors. Decide the target while you are watching the projected picture, and watching the reference palette as a guide.

32 Adjusting the Picture Using Real Color Processing