Location and Function of Controls

qf Connector panel cover lock

Used to remove/install the connector panel cover 9.

Bottom2

1 1

While pressing both sides of the lock, slide the connector cover outward to release it.

qg Rear adjusters

qh Adjusters

When a picture is projected on an exterior of the screen, adjust the picture using these adjusters.

For details on how to use the adjusters, see “How to use the adjusters” on page 11 (GB).

qj Security lock

Connects to an optional security cable (made by Kensington)1).

The security lock corresponds to Kensington’s MicroSaver ®1) Security System.

If you require further information, contact Kensington

2855 Campus Drive, San Mateo, CA 94403

In North America

Phone: 800-235-6708

Fax: 800-247-1317

Outside North America

Phone: 847-541-9500

Home page address:

http://www.kensington.com/

qk Lamp cover

ql Ventilation holes (intake)

w; Right speaker

wa Air filter cover lock

Used to remove the air filter cover.

For details, see “Cleaning the Air Filter” on page 38 (GB).

Note

Clean the air filter every 300 hours to ensure optimal performance.

ws Ventilation holes (intake) / air filter cover

Notes

•Do not place anything near the ventilation holes as it may cause internal heat build-up.

•Do not place your hand or objects near the ventilation holes — the air coming out is hot.

.........................................................................................................................................................................................................

1) Kensington and MicroSaver are registered trademarks of Kensington Technology Group.

10 (GB)