The SET SETTING Menu / The INSTALL SETTING Menu
STATUSSets up the
ON: Shows all of the
OFF: Turns off the
For details on the warning messages, see page 40 (GB).
Selects the computer, component or video GBR (15k RGB) signal input from the INPUT A connector.
Note
If the setting is not correct, “Please check
When set to ON, the projector detects input signals in the following order:
Selects the language used in the menu and
Available languages are: English, French, German, Italian, Spanish, Japanese, Chinese, Portuguese and Korean.
POWER SAVINGWhen set to ON, the projector goes into the power saving mode if no signal is input for 10 minutes.
IR RECEIVERSelects the remote control detectors on the front and rear of the projector.
FRONT & REAR: Activates both the front and rear detectors.
FRONT: Activates the front detector only.
REAR: Activates the rear detector only.
The INSTALL SETTING Menu
The INSTALL SETTING menu is used for changing the install settings of the projector.
INSTALL SETTING | |
|
KEYSTONE MEM: ON
DIGIT KEYSTONE: 0
INSTALLATION:
MENU POSITION: CENTER
MENU COLOR: STANDARD
MENU BACKGRND: STANDARD
LAMP TIMER: 234H
Operation
1. Select an item
Use the Mor m key to select the item, then press the
,or ENTER key.
2. Adjust an item
•When changing the adjustment level:
To increase the value, press the Mor ,key. To decrease the value, press the mor <key. Press the ENTER key to restore the original screen.
•When changing the setting:
Press the Mor mkey to change the setting.
Press the ENTER or <key to restore the original screen.
32 (GB)