qf RESET/ESCAPE key
When the PJ/NETWORK select switch is set to PJ: Functions as the RESET key.
When the PJ/NETWORK select switch is set to NETWORK
qg D ZOOM +/– key
Enlarges the image at a desired location on the screen. This key works only when a signal from a computer is input.
+: Pressing the + key once displays the icon. This icon indicates the point you want to enlarge. Use an arrow key (M/m/</,) to move the icon to the point to be enlarged. Press the + key repeatedly until the image is enlarged to meet your requirements.
qh L (left) CLICK key
When the PJ/NETWORK select switch is set to
PJ: Functions as the left button of the mouse of the computer connected to this projector.
When the PJ/NETWORK select switch is set to NETWORK
left button of the mouse in the INPUT B window of this projector.
qj MENU/TAB key
When the PJ/NETWORK select switch is set to
PJ: Functions as the MENU key.
When the PJ/NETWORK select switch is set to NETWORK
qk APA (Auto Pixel Alignment) key
ql VOLUME +/– keys
w; HELP key
If you need help information during an operation, press this key to display help messages.
wa PJ/NETWORK select switch
To use the Remote Commander for network operations, set the switch to NETWORK. Set the switch to PJ to use the Remote Commander for normal operations other than networking. This switch is only available for the
For details on the operation of the Windows CE screen, see the supplied “Operating Instructions for Networking.”
ws COMMAND ON/OFF switch
When this switch is set to OFF, no keys on the Remote Commander will function. This saves battery power.
Location and Function of Controls
wd Transmission indicator
Lights up when you press a key on the Remote Commander.
This indicator does not light up when you use the laser pointer.
wf Infrared transmitter
wg Laser transmitter
15 (GB)