To connect 15k RGB/Component equipment

Left side

MOUSE

AUDIO

VIDEO S VIDEO

PLUG IN POWER

CTRL S AUDIO

INPUT A ~AC IN

Stereo

SMF-402 Signal Cable (not

audio

supplied) HD D-sub 15-pin

connecting

(male) y 3 ⋅ phono jack

cable (not

 

supplied)

 

to audio

to RGB/

component

output

output

15k RGB/Component equipment

Notes

•Set the aspect ratio using ASPECT in the INPUT SETTING menu according to the input signal.

For details, see page 30 (GB).

•When you connect the projector to 15k RGB/ component video equipment, select RGB, component or VCR GBR with the INPUT-A setting in the SET SETTING menu.

•Use the composite sync signal when you input the external sync signal from 15k RGB/component equipment.

Connecting the Projector

Connecting to a LAN (VPL-PX15 only)

This projector is networking compatible. Using a wireless LAN PC card or a 10BASE-T/100BASE-TX LAN cable, you can connect the projector to a wireless or wired LAN. You can also install a PC memory card.

This section describes how to connect to a LAN and how to install a PC card.

Whenever you connect the projector to a LAN or use a memory card, set INPUT-B FUNC. in the INSTALL SETTING menu to ON.

For details, see page 33 (GB).

Installing a PC card

When you use a wireless LAN PC card or memory card, insert the card into the INPUT B PC CARD slot.

The eject button pops out when the card is inserted.

PUSH

PC card

Insert the card with the arrow mark facing toward the slot.

To remove the PC card from the slot, press the eject button.

21 (GB)