Sony VPL-PX15 Others, Warning messages, Caution messages

Troubleshooting

Others

Symptom	Cause	Remedy
The LAMP/COVER indicator	The lamp cover or the air filter cover is	Attach the cover securely (see pages 37 (GB) and
flashes.	detached.	38 (GB)).
The LAMP/COVER indicator	The lamp has reached the end of its life.	Replace the lamp (see page 37 (GB)).
lights up.
	The lamp has reached too a high	Wait for 90 seconds to cool down the lamp and
	temperature.	turn on the power again (see page 25 (GB)).
The TEMP/FAN indicator	The fan is broken.	Consult with qualified Sony personnel.
flashes.
The TEMP/FAN indicator	The internal temperature is unusually	Check to see if nothing is blocking the ventilation
lights up.	high.	holes.
Both LAMP/COVER and	The electrical system has failed.	Consult with qualified Sony personnel.
TEMP/FAN indicators light up.
The INPUT B window does	INPUT-B FUNC. is set to OFF.	Set INPUT-B FUNC. in the INSTALL SETTING
not appear, or INPUT B		menu to ON (see page 33 (GB)).
cannot be selected. (VPL-
PX15 only)
The menu display does not	The PJ/NETWORK select switch on the	Set the PJ/NETWORK select switch to PJ, then
appear even when you press	Remote Commander is set to	press the MENU key.
the MENU key on the VPL-	NETWORK.
PX15/PX10 Remote
Commander.

Warning messages

Use the list below to check the meaning of the messages displayed on the screen.

Message	Meaning	Remedy
High temp.!	Internal temperature is too high.	Turn off the power.
Lamp off in 1 min.		Check to see if something is blocking the
		ventilation holes.
Frequency is out of range!	This input signal cannot be projected as	Input a signal that is within the frequency range.
	the frequency is out of the acceptable
	range of the projector.
	The resolution setting of the output	Set the setting of output to XGA (VPL-PX15/PX10)
	signal of the computer is too high.	or SVGA (VPL-PS10) (see page 18 (GB)).
Please check INPUT-A	You have input an RGB signal from the	Set INPUT-A correctly (see page 32 (GB)).
setting.	computer when INPUT-A in the SET
	SETTING menu is set to COMPONENT
	or VIDEO GBR.
Please replace the LAMP.	It is time to replace the lamp.	Replace the lamp.
Backup Battery Very Low	The backup battery for the network is	Consult with qualified Sony personnel.
(VPL-PX15 only)	exhausted.

Caution messages

Use the list below to check the meaning of the messages displayed on the screen.

Message	Meaning	Remedy
NO INPUT	No input signal	Check connections (see pages 18 (GB) to 23 (GB)).
Not applicable!	You have pressed the wrong key.	Press the appropriate key.

40 (GB)