Projecting

To enlarge the image (Digital Zoom function)

You can enlarge an area on the image you select. This function works only when a signal from a computer is input.

1 Project the original size picture and press the D ZOOM + key on the Remote Commander.

The Digital Zoom icon appears in the center of the image.

Digital Zoom icon

2 Move the icon to a point in the center of the portion of the image you want to enlarge. Use the arrow keys (M/m/</,) to move the icon.

3 Press the D ZOOM + key again.

The portion of the image where the icon is located is enlarged. The magnification ratio is displayed on the screen for a few seconds.

By pressing the + key repeatedly, the image size increases (maximum magnification: 4 times) .

Use the arrow keys (M/m/</,) to scroll the enlarged image.

To return the image to its original size

Press the D ZOOM – key. Pressing the RESET key returns the image to its original size in one operation.

To freeze the image projected (Freeze function)

Press the FREEZE key. “FREEZE” appears when the key is pressed. This function works only when a signal from a computer is input.

To restore the original screen, press the FREEZE key again.

To use the Laser Pointer function (VPL- PX15/PX10 only)

Press the LASER key on the Remote Commander. The laser pointer appears. The pointer is helpful in indicating a particular point on the screen.

26 (GB)