Sony XR-C750 operating instructions CD/MD Changer, Playing a CD or MD

With Optional Equipment

CD/MD Changer

If you connect an optional CD changer with the CD-TEXT function, the CD-TEXT information will appear in the display when you playback a CD-TEXT disc.

Playing a CD or MD

1 Press (SOURCE) repeatedly to select the

CD or MD.

2 Press (MODE) until the desired changer indication appears in the display.

CD/MD playback starts.

Changing the displayed item

Each time you press (DSPL) during CD, CD- TEXT or MD playback, the item changes as follows:

EN
				$
			Elapsed	playback time
			Disc name*1	$
				/Artist name*2
					$
			Track		name*3
				$
			C	loc		k
*1		If you have not labeled the CD or there is no disc name
		prerecorded on the MD, “NO D. Name” appears in the
		display.
	*2 If you play a CD-TEXT disc, the artist name appears in
		the display after the disc name. (Only for CD-TEXT
		discs with the artist name)
*3		If the track name of a CD-TEXT disc or MD is not
		prerecorded, “NO T. Name” appears in the display.

You can label a personalized name for CDs and CD-TEXT discs with the disc memo function, refer to “Labeling a CD” (page 15).

Tip

If the name of the CD-TEXT disc or MD is too long, you can scroll it across the display by pressing (SHIFT), then

(1)(N).

Automatically scrolling a disc name

— Auto Scroll

If the disc name/artist name or track name on a CD-TEXT or MD disc exceeds 10 characters and the Auto Scroll function is on, automatically scrolls on the display as follows.

•The disc name appears when the disc has changed (if the disc name is selected).

•The track name appears when the track has changed (if the track name is selected).

•The disc or track name appears depending on the setting when you press (SOURCE) to select an MD or CD- TEXT disc.

If you press (DSPL) to change the display item, the disc or track name of the MD or CD- TEXT disc is scrolled automatically whether you set the function on or off.

1 Press (SHIFT), then press (2) (SET UP) repeatedly until “A. Scrl” appears.

2 Press (4) (n) to select “A. Scrl on.”

3 Press (SHIFT).

To cancel Auto Scroll, select “A. Scrl off” in step 2 above.

Note

For some CD-TEXT discs with extremely many characters, the following cases may happen:

-Some of the characters are not displayed.

-Auto Scroll does not work.

Displaying the recording date of the currently selected MD

Press (DSPL) for two seconds during MD playback.

The recording date of the track is displayed for about three seconds.

Locating a specific track

—Automatic Music Sensor (AMS)

During playback, press either side of (SEEK/AMS) once for each track you wish

to skip.

SEEK/AMS

To locate succeeding tracks

To locate preceding tracks

Locating a specific point in a track

— Manual Search

During playback, press and hold either side of (SEEK/AMS). Release the button when you have found the desired point.

SEEK/AMS

To search forward

To search backward

Locating a disc by disc number

—Direct Disc Selection

Press the number button that corresponds with the desired disc number.

The desired disc in the currently selected changer begins playback.

12