Sony XR-C750 Locating a disc by name, Selecting the specific tracks for playback, Schubert

Displaying the disc memo

During playback, press (DSPL).

CD1 DISC NAME

SUR EQ 4 SCHUBERT

Each time you press (DSPL) during CD playback, the item changes as follows:

z Elapsed playback time z Disc name∗1

Clock Z Track name∗2 Z

∗1 When you connect an optional CD changer with the CD-TEXT function, the personalized label or the CD- TEXT disc name appears. See below to change the display.

-To change the displayed item press (4) (n).

-To change the display using Display settings (page 11).

The display item will change depending on the setting as follows.

	Type of	Priority display	Actual display
	disc	setting
	A	D.MEMO	Disc memo
		CD-TEXT	CD-TEXT information
EN
	B	D.MEMO	Disc memo
		CD-TEXT
	C	D.MEMO	CD-TEXT information
		CD-TEXT
	D	D.MEMO	NO D. Name
		CD-TEXT

A: CD-TEXT disc with disc memo

B: Normal CD with disc memo

C: CD-TEXT disc without disc memo

D: Normal CD without disc memo

∗2 If you connect an optional CD changer with the CD- TEXT function, the CD-TEXT information will appear on the display when you playback a CD-TEXT disc.

Erasing the disc memo

1 Press (SOURCE) repeatedly to select CD.

2 Press (MODE) repeatedly to select the CD changer.

3 Press (LIST) for two seconds.

4 Press (DSPL) for two seconds.

“Delete” and the disc memo appear in the display.

5 Rotate the dial to select the name you want to erase.

6 Press (5) (ENTER) for two seconds. The name is erased.

Repeat steps 5 and 6 if you want to erase other names.

7 Press (LIST) for two seconds.

The unit returns to the normal CD playback

16 mode.

Locating a disc by name

—List-up (CD changer with custom file function or MD changer)

You can use this function for the discs that have been assigned a personalized name. For more information on disc names, refer to “Labeling a CD” (page 15).

1 Press (LIST) momentarily.

The names assigned to the disc currently playing and the next disc to be played appear in the display. The name assigned to currently playing disc is flashing.

LST

SUR EQ	4 SCHUBERT
	ENTER

If you add disc memo labels to a CD-TEXT disc, the display setting you make will determine which information is displayed. If the disc has only one set of information (either CD-TEXT or disc memo labels ), that information will be displayed regardless of the display setting you make.

2 Press (LIST) repeatedly until you find the desired disc.

3 Press (5) (ENTER) to play back the disc.

Notes

•To go back to the normal display, press (DSPL). Once a disc name has been displayed for five seconds, the display goes back to the normal playback mode.

•The track names are not displayed during MD playback.

•If there are no discs in the magazine, “NO Disc” appears in the display.

•If a disc has not been assigned a custom file, “********” appears in the display.

•If the disc information has not been read by the unit, “?” appears in the display. To load the disc, first press a number button, then choose a disc that has not been loaded.

•The information appears only in upper cases. There are also some letters which cannot be displayed (during MD playback).

Selecting the specific tracks for playback

— Bank/Custom File

(CD changer with custom file function)

If you label the disc, you can set the unit to skip tracks and play only the tracks you want.

1 Start playing the disc and press (SHIFT).

Then press (3) (PLAY MODE) for two seconds.