Locating the beginning of a track
— Automatic Music Sensor (AMS)
You can skip up to nine tracks at one time.
During playback, press either side of (SEEK/AMS) momentarily.
SEEK/AMS To locate
succeeding tracks
To locate preceding tracks
Note
The AMS function may not work when:
•the blanks between tracks are shorter than four seconds.
•there is noise between tracks.
•there are long sections of low volume or quiet sections.
Changing the displayed item
Each time you press (DSPL), the item changes as follows:
zTape playback z Clock z Frequency*
*While the ATA function is activated.
EN
Playing tracks repeatedly
— Repeat play
You can repeat play the current track.
1 During playback press (SHIFT).
Each time you press (SHIFT), only the items you can select light up.
Playing a tape in various modes
You can play the tape in various modes: •Intro (Intro Scan) lets you play the first 10
seconds of all the tracks.
•NR (Dolby NR) lets you select the Dolby* NR B or C system.
•ATA (Automatic Tuner Activation) turns on the tuner automatically while
•B.Skip (Blank Skip) skips blanks longer than eight seconds.
∗Dolby noise reduction manufactured under license
from Dolby Laboratories Licensing Corporation. “DOLBY” and the
1Press (SHIFT), then press (3) (PLAY
MODE) repeatedly until the desired play mode appears.
Each time you press (3), the item changes as follows:
Intro nNR nATA nB.Skip
FWD
SUR EQ | Intro off |
| |
| PLAY MODE |
2 Press (4) (n) to select the desired play mode setting (for example: on, NR B).
FWD
SHIFT 
PLAY MODEREP
1 |
| 2 |
| 3 |
| 4 |
| 5 |
| 6 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SUR EQ | Intro on |
| |
| PLAY MODE |
Playback starts.
2 Press (6) (REP).
Repeat play starts.
To go back to the normal playback mode, press
(6)again.
3 Press (SHIFT).
3 Press (SHIFT).
To go back to the normal playback mode, select “off” in step 2 above.
6
