Receiving the memorized stations
1 Press (SOURCE) repeatedly to select the tuner.
2 Press (MODE) repeatedly to select the desired band.
3 Press the number button ((1) to (10)) momentarily where the desired station is stored.
If you cannot tune in a preset station
Press either side of (SEEK/AMS) momentarily to search for the station (automatic tuning).
Scanning stops when the unit receives a station. Press either side of (SEEK/AMS)
EN repeatedly until the desired station is received.
Note
If the automatic tuning stops too frequently, press (SHIFT), then press (3) (PLAY MODE) repeatedly until “Local” (local seek mode) appears. Then press (4) (n) to select “Local on.” Press (SHIFT).
Only the stations with relatively strong signals will be tuned in.
Tip
If you know the frequency of the station you want to listen to, press and hold down either side of (SEEK/AMS) for a few seconds until the desired frequency appears (manual tuning).
If FM stereo reception is poor
— Monaural Mode
1 Press (SHIFT), then press (3) (PLAY
MODE) repeatedly until “Mono” appears.
2 Press (4) (n) repeatedly until “Mono on” appears.
The sound improves, but becomes monaural (“ST” disappears).
3 Press (SHIFT).
To go back to the normal mode, select “Mono off” in step 2 above.
Changing the displayed item
Each time you press (DSPL), the item changes as follows:
Frequency ÷Clock
Storing the station names
— Station Memo
You can assign a name to each radio station and store it in memory. The name of the station currently tuned in appears in the display. You can store up to eight characters for a station.
Storing the station names
1 Tune in a station whose name you want to store.
2 Press (LIST) for two seconds.
FM1
SUR EQ | 2 ________ |
|
3 Enter the characters.
1Rotate the dial in a clockwise direction to select the desired
characters.
(A nB nC n··· Z n0 n1 n2 n
··· 9 n+ n– n* n/ n\ n> n< n. n_ )
FM1
SUR EQ | 2 W_______ |
|
If you rotate the dial in a counterclockwise direction, the characters appear in the reverse order. If you want to put a blank space between characters, select “_” (under- bar).
2Press (4) (n) after locating the desired character.
The flashing cursor moves to the next space.
FM1
SUR EQ | 2 W_______ |
|
If you press (1) (N), the flashing cursor moves to the left.
3Repeat steps 1 and 2 to enter the entire name.
4 To return to the normal radio reception, press (LIST) for two seconds.
Tip
To erase/correct a name, enter “_”
8
