Getting Started, Resetting the unit

Getting Started

Resetting the unit

Before operating the unit for the first time or after replacing the car battery, you must reset the unit.

Press the reset button with a pointed object such as a ball-point pen.

Front panel detached

Reset button

		Note
	EN	Pressing the reset button will erase the clock and some
	EN	memorized functions.
		memorized functions.

Detaching the front panel

You can detach the front panel of this unit to prevent the unit from being stolen.

1 Press (OFF).

2 Press (OPEN) to open up the front panel, then pull it off towards you.

Notes

•Do not put anything on the inner surface of the front panel.

•Be sure not to drop the panel when detaching it from the unit.

•If you detach the panel while the unit is still on, the power will turn off automatically to prevent the speakers from being damaged.

•When you carry the front panel with you, put it in the supplied front panel case.

Attaching the front panel

Align the front panel with the unit, and push in.

Notes

•Be sure not to attach the front panel upside down.

•Do not press the front panel hard against the unit when attaching it. Press it lightly against the unit.

•Do not press hard or put excessive pressure on the display of the front panel.

•Do not expose the front panel to direct sunlight, heat sources such as hot air ducts, and do not leave it in a humid place. Never leave it on the dashboard of a car parked in direct sunlight where there may be a considerable rise in temperature.

Caution alarm

If you turn the ignition key switch to the OFF position without removing the front panel, the caution alarm will beep for a few seconds (only when the POWER SELECT switch on the bottom of the unit is set to the A position).

Preparing the rotary remote

When you mount the rotary remote, attach the label in the illustration below.

LIST

MODE

SOUND