Receiving the stored stations

1 Press (SOURCE) repeatedly to select the radio.

2 Press (MODE) repeatedly to select the band.

3 Press the number button ((1) to (6)) on which the desired station is stored.
If preset tuning does not work
— Automatic tuning/Local Seek Mode
Automatic tuning:Press either side of (SEEK) to search for the station (automatic tuning).

Scanning stops when the unit receives a station. Repeat until the desired station is received.

Local Seek Mode:

If the automatic tuning stops too frequently, press (SENS) repeatedly until “LOCAL-ON” appears.

“LCL” indicator is displayed.

Only the stations with relatively strong signals will be tuned in.To cancel the local seek mode, select “LOCAL- OFF.”

Tip

If you know the frequency of the station you want to listen to, press and hold either side of (SEEK) to locate the approximate frequency, then press (SEEK) repeatedly to fine adjust to the desired frequency (manual tuning).

If FM stereo reception is poor
— Monaural Mode
During radio reception, press (SENS) repeatedly until “MONO-ON” appears.

“MONO” indicator is displayed.

The sound improves, but becomes monaural (“ST” disappears).To return to normal play mode, select “MONO- OFF.”

Tip

If FM broadcasts are difficult to hear, set DSO to “OFF” (page 16).

Storing only the desired stations

You can manually preset the desired stations on any chosen number button.

1 Press (SOURCE) repeatedly to select the radio.

2 Press (MODE) repeatedly to select the band.

3 Press either side of (SEEK) to tune in the station that you want to store.

4 Press the desired number button ((1) to (6)) for 2 seconds until “MEM” appears.

The number button indication appears in the display.

Note

If you try to store another station on the same number button, the previously stored station will be erased.

11