Sony XR-CA660X Error displays/Messages, Error displays, Messages, RESET, NO MAG, OFFSET, BLANK*1, ERROR*1, FAILURE, HI TEMP, NO DISC, NO MUSIC, “” or “”, NOT READY

Error displays/Messages

Error displays

(For this unit and optional CD/MD changers)

The following indications will flash for about 5 seconds, and an alarm sound will be heard.

BLANK*1No tracks have been recorded on an MD.*2tPlay an MD with recorded tracks on it.ERROR*1•A CD is dirty or inserted upside down.*2 t Clean or insert the CD correctly.•An MD does not playback because of some problem.*2t Insert another MD.•A CD/MD cannot play because of some problem.t Insert another CD/MD.FAILUREThe connection of speakers/amplifiers is incorrect.tSee the installation guide manual of this model to check the connection.HI TEMPThe ambient temperature is more than 50°C.tWait until the temperature goes down below 50°C.NO DISCNo disc is inserted in the CD/MD unit.tInsert discs in the CD/MD unit.NO MAGThe disc magazine is not inserted in the CD/ MD unit.tInsert the magazine in the CD/MD unit.NO MUSICA CD which is not a music file is inserted in the MP3 playable CD unit.tInsert a music CD in the MP3 playable CD unit.NOT READYThe lid of the MD unit is open or the MDs are not inserted properly.tClose the lid or insert the MDs properly.OFFSETThere may be an internal malfunction.

tCheck the connection. If the error indication remains on in the display, consult your nearest Sony dealer.

RESETThe CD/MD unit cannot be operated because of some problem.tPress the RESET button on the unit.

*1 When an error occurs during playback of a CD or MD, the disc number of the CD or MD does not appear in the display.

*2 The disc number of the disc causing the error appears in the display.

If these solutions do not help improve the situation, consult your nearest Sony dealer.

Messages

L.SEEK +/–The Local Seek mode is on during automatic tuning (page 11).“” or “”

You have reached the beginning or the end of the disc and you cannot go any further.

25