Cassette Player
Listening to a tape
1 Press (OPEN) and insert a cassette.
Playback starts automatically.
2 Close the front panel.
If a cassette is already inserted, press (SOURCE) repeatedly until “FWD” or “REV” appears to start playback.
FWD: The side facing up is played.
REV: The side facing down is played.
The side facing up is played.
The side facing down is played.
Fast-winding the tape
During playback, press and hold either side of (SEEK).
SEEK
Rewind
To start playback during
Locating a specific track
—Automatic Music Sensor (AMS)
During playback, press either side of (SEEK) momentarily for each track you want to skip.
You can skip up to nine tracks at one time.
To locate succeeding tracks
SEEK
To locate preceding tracks
Note
The AMS function may not work when:
–the blanks between tracks are shorter than 4 seconds.
–there is noise between tracks.
–there are long sections of low volume or quiet sections.
ToPress
Change the tape’s (MODE) (o) playback direction
Stop playback | (OFF) |
|
|
Eject the cassette | (OPEN) then Z |
|
|
9