Using the rotary commander
First, attach the appropriate label depending on how you want to mount the rotary commander. The rotary commander works by pressing buttons and/or rotating controls.
SEL | DSPL |
MODE | MODE |
DSPL | SEL |
By pressing buttons
| (ATT) |
|
| (SEL) |
|
| (MODE) | |
(SOURCE) |
|
|
|
| OFF |
| (DSPL) | (OFF) |
|
| |
Rotate the VOL control |
| |
to adjust the volume. |
| |
Press | To |
|
(SOURCE) | Change source |
|
| (Radio/CD*1/MD*1/Tape)/ | |
| Power on |
|
(MODE) | Change operation |
|
| (Radio band/CD unit*1/MD | |
| unit*1/Tape playback |
|
| direction) |
|
(ATT) | Attenuate sound |
|
(OFF)*2 | Stop playback or radio | |
| reception/Power off |
|
(SEL) | Adjust and select |
|
(DSPL) | Change the display item |
By rotating the control
SEEK/AMS control
Rotate and release to:–Locate the beginning of tracks on the tape.–Tune in stations automatically.–Skip tracks on the disc.*1Rotate, hold, and release to:–Tip
To start playback while
(MODE).
By pushing in and rotating the control
PRESET/DISC control
Push in and rotate the control to:–Receive preset stations.–Change discs during CD (MD) playback*1.During playback of a CD containing MP3 files*3Push in and repeat rotating quickly to:– Change discs one by one.Push in, then rotate and hold to:– Change albums.*1 Only if the corresponding optional equipment is connected.
*2 If your car has no ACC (accessory) position on the ignition key switch, after turning off the ignition, be sure to press and hold (OFF) until the display disappears.
*3 Available only when optional CD unit with the MP3 file control function is connected.
continue to next page t
13