Recording from the radio or a CD
REC | MD ^ | Jog dial |
You can record from the radio or a CD to an MD using the REC button. You can start or stop recording at any point you want. You can also pause recording.
Notes
•After you stop recording,
do not disconnect the AC power cord or move the player while “TOC EDIT” is flashing in the display. If you do so, recording may not be done properly.
•While recording from radio, you cannot change the station.
•If you turn up the volume too high, sound skipping may occur.
Tips
•To add track marks during recording, press REC where you want to add track marks.
•To record over the previous recording, see page 28.
•To add track marks after recording, see “Dividing recorded tracks” on page 34.
CD ^ BAND CD p
Recording from the radio
When receiving conditions are good, track marks are added on the MD automatically:
–when there is no sound input during recording for more than 2 seconds.
–when a soft sound like pianissimo continues during recording.
–when you pause recording.
If unnecessary track marks are added, erase them after recording (see “Combining recorded tracks” on page 36).
1 Tune in the station you want to record from. 2 Insert a recordable MD.
3 Press REC (ron the remote).
Recording does not start (recording standby mode).
4 Press MD ^(MD (or MD Pon the remote).
Recording will be made from the last recorded position.
To stop recording
Press MD p.
26GB Recording