Erasing recordings

(Erase Function)

EDIT ENTER•YES

 

You can quickly erase the recorded tracks or unnecessary portion in the track. Unlike a cassette-corder, blank portion will not remain after erasure.

Here are three options to erase recordings:

• Erasing a single track

• Erasing all tracks on an MD

• Erasing a portion of a track

Editing

Notes

•If “Protected” appears in the display, the tab on the MD is in the record-protect position (page 56).

•After you stop recording,

do not disconnect the AC power cord or move the player while “TOC EDIT” is flashing in the display. If you do so, recording may not be done properly.

Erasing a single track

You can erase a whole track quickly. When you erase a track, the total number of tracks on the MD decreases by one and all tracks following the erased one are renumbered.

1 Play the track you want to erase.

2 Press EDIT repeatedly until “Track Erase” appears in the display.

3 Press ENTER•YES.

“Erase OK?” appears in the display, and one-track repeat play starts. Once you have erased a track, you cannot recover it. Be sure to check the contents of the track you are trying to erase.

If you want to cancel the erase function at this point:

Press CANCEL•NO or MD p.

4 Press ENTER•YES.

“Complete” appears in the display for a few seconds, and the current track will be erased.

MD the on tracks recorded

continued

Editing recorded tracks on the MD 31GB