Troubleshooting (continued)

MD Player

Radio

Timer

Symptom

Remedy

 

The MD does not record.

• The MD is record-protected ("Protected"

 

 

appears). Close the record-protect slot.

 

 

• The track has been protected using another MD

 

 

recorder ("Trk Protect" appears). Release the

 

 

track-protect on the same MD recorder that

 

 

protected the track.

 

 

• The player is not connected properly to the

 

 

sound source. Make connections properly to

 

 

the sound source.

 

 

• A pre-mastered MD is inserted. Replace it with

 

 

a recordable MD.

 

 

• There is not enough space left on the MD.

 

 

Replace it with another recordable MD with

 

 

enough space, or erase unnecessary tracks.

 

 

• There has been a power failure or the mains

 

 

lead has been disconnected. Data recorded to

 

 

that point may be lost. Repeat the recording

 

 

procedure.

 

 

 

 

The recorded sound drops out.

• The sound was recorded at high volume.

 

 

Record again at lower volume.

 

A stereo program cannot be

• Press MONO/ST until "STEREO" appears in the

 

received in stereo.

display (page 11).

 

 

 

 

The audio is weak or has poor

• The FM stereo broadcast may be noisy (page

 

quality.

11).

 

 

• Move the player away from the TV.

 

 

• If you are using the remote while listening to an

 

 

MW/LW radio, noise may be heard. This is

 

 

unavoidable.

 

 

• Move the MW/LW loop aerial away from the

 

 

player.

 

The timer does not operate.

• Make sure the time on the clock is correct.

 

 

• Check to see if the AC power had been cut off.

 

 

• Make sure "TIMER REC" or "TIMER PLAY"

 

 

appears in the display.

 

 

• Check and change the preset start/stop time if

 

 

both times are set to the same time.

 

62GB

 

Additional Information